Investigate The Effect of Adding Nanoparticle to Palm Oil on Tribological of Lubricants -Review Study
Abstract views: 178
/ 
PDF downloads: 73
DOI:
https://doi.org/10.5281/zenodo.8189004Keywords:
Fossil fuels, palm oil, biolubricant, internal combustion engine, tribological behaviorAbstract
Due to the growing up demand for fossil fuels and increases in the concerns about fossil fuel depilation which is considered the major source of lubrication. Biolubricants are an alternative solution for conventional oil to face the dangers of fossil fuel depletion. In internal combustion engines, Lubrication processes play a vital role due to the significant number of moving parts inside it. The primary function of Lubricants is to prevent friction generated between two moving parts and make the working of machines smooth. Biolubricants are renewable, biodegradable, have good tribological behaviors, are nontoxic, zero-emission for greenhouse gases, are non-hazardous, have low volatility, and are inexpensive. All these advantages of Biolubricants, yet their use as lubricants are constrained because it suffers from low oxidative stability. Therefore, various chemical modifications must be done on Biolubricants to reach the proper lubricant properties. These chemical modifications improved the thermo-oxidative stabilities of the Biolubricants, thereby enhancing the quality of biolubricants. This study reviews the physicochemical properties of Palm oil and summarized the chemical modifications of the Palm oil and sheds light on the tribological behavior of palm oil as a lubricant in internal combustion engines and its function to reduce the friction between the moving parts.
References
Ahmed, D.I., Kasolang, S., Dwyer-Joyce, R.S., Sainan, K.I., Roselina, N.N., 2014. Formulation and physico-chemical characteristics of biolubricant. Journal Tribologi, 3(1): 1-10.
Ali, I., Kucherova, A., Memetov, N., Pasko, T., Ovchinnikov, K., Pershin, V., Tkachev, A., 2019. Advances in carbon nanomaterials as lubricants modifiers. Journal of Molecular Liquids, 279: 251-266.
Azman, S.S.N., Zulkifli, N.W. M., Masjuki, H., Gulzar, M., Zahid, R., 2016. Study of tribological properties of lubricating oil blend added with graphene nanoplatelets. Journal of Materials Research, 31(13): 1932-1938.
Bajaj, D.S., Jahagirdar, D.R., 2018. Experimental investigation on usage of cotton seed oil as a lubricant to substitute mineral oil. In Proceedings of TRIBOINDIA-2018 An International Conference on Tribology.
Cecilia, J.A., Ballesteros Plata, D., Alves Saboya, R.M., Tavares de Luna, F.M., Cavalcante Jr, C.L., Rodríguez-Castellón, E., 2020. An overview of the biolubricant production process: Challenges and future perspectives. Processes, 8(3): 257.
Cho, D.H., Wang, L., Kim, J.S., Lee, G.H., Kim, E.S., Lee, S., Lee, C., 2013. Effect of surface morphology on friction of graphene on various substrates. Nanoscale, 5(7): 3063-3069.
Choopanya, P., Yang, Z., 2016. An effective mesh strategy for CFD modelling of polymer electrolyte membrane fuel cells. International Journal of Hydrogen Energy, 41(15): 6445-6456.
Chou, R., Battez, A.H., Cabello, J.J., Viesca, J.L., Osorio, A., Sagastume, A., 2010. Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles. Tribology International, 43(12): 2327-2332.
Chowdary, K., Kotia, A., Lakshmanan, V., Elsheikh, A.H., Ali, M.K.A., 2021. A review of the tribological and thermophysical mechanisms of bio-lubricants based nanomaterials in automotive applications. Journal of Molecular Liquids, 339: 116717.
De Wijn, A.S., 2016. Nanoscience: Flexible graphene strengthens friction. Nature, 539(7630): 502–503.
Encinar, J.M., Nogales, S., González, J.F., 2020. Biodiesel and biolubricant production from different vegetable oils through transesterification. Engineering Reports, 2(12): e12190.
Garcés, R., Martínez-Force, E., Salas, J.J., 2011. Vegetable oil basestocks for lubricants. Grasas y aceites, 62(1): 21-28.
Gul, M., Masjuki, H.H., Kalam, M.A., Zulkifli, N.W.M., Mujtaba, M. A., 2020. A review: role of fatty acids composition in characterizing potential feedstock for sustainable green lubricants by advance transesterification process and its global as well as Pakistani prospective. BioEnergy research, 13: 1-22.
Gulzar, M., Masjuki, H.H., Kalam, M.A., Varman, M., Zulkifli, N. W. M., Mufti, R.A., Zahid, R., 2016. Tribological performance of nanoparticles as lubricating oil additives. Journal of Nanoparticle Research, 18: 1-25.
Haigh, K. F., Saha, B., Vladisavljević, G. T., Reynolds, J. C., 2012. Kinetics of the pre-treatment of used cooking oil using Novozyme 435 for biodiesel production. Procedia Engineering, 42: 1106-1113.
Hussein, R. Z., Attia, N. K., Fouad, M. K., ElSheltawy, S. T., 2021. Experimental investigation and process simulation of biolubricant production from waste cooking oil. Biomass and Bioenergy, 144: 105850.
Jia, X., Huang, J., Li, Y., Yang, J., Song, H., 2019. Monodisperse Cu nanoparticles@ MoS2 nanosheets as a lubricant additive for improved tribological properties. Applied surface science, 494: 430-439.
Gara, L.L., Zou, Q., 2013. Friction and wear characteristics of oil-based ZnO nanofluids. Tribology Transactions, 56(2): 236-244.
Loh, S. K., Chew, S. M., Choo, Y. M., 2006. Oxidative stability and storage behavior of fatty acid methyl esters derived from used palm oil. Journal of the American Oil Chemists' Society, 83: 947-952.
Menkiti, M. C., Ocheje, O., Agu, C. M., 2017. Production of environmentally adapted lubricant basestock from jatropha curcas specie seed oil. International Journal of Industrial Chemistry, 8: 133-144.
Mofijur, M., Masjuki, H. H., Kalam, M. A., Shahabuddin, M., Hazrat, M. A., Liaquat, A. M., 2012. Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear. Energy Procedia, 14: 1748-1753.
Mokarian, M., Ameri, E., 2022. The effect of Mg (OH) 2 nanoparticles on the rheological behavior of base engine oil SN500 HVI and providing a predictive new correlation of nanofluid viscosity. Arabian Journal of Chemistry, 15(6): 103767.
Nafchi, F. M., Afshari, E., Baniasadi, E., Javani, N., 2019. A parametric study of polymer membrane electrolyser performance, energy and exergy analyses. International Journal of Hydrogen Energy, 44(34): 18662-18670.
Narayana Sarma, R., Vinu, R., 2022. Current status and future prospects of biolubricants: properties and applications. Lubricants, 10(4): 70.
Ren, B., Gao, L., Li, M., Zhang, S., Ran, X., 2020. Tribological properties and anti-wear mechanism of ZnO@ graphene core-shell nanoparticles as lubricant additives. Tribology International, 144: 106114.
Wu, Y.Y., Tsui, W.C., Liu, T.C., 2007. Experimental analysis of tribological properties of lubricating oils with nanoparticle additives. Wear, 262(7-8): 819-825.
Yang, J., Chen, Y., Xu, P., Li, Y., Jia, X., Song, H., 2019. Fabrication of compressible and underwater superoleophobic carbon/g-C3N4 aerogel for wastewater purification. Materials Letters, 254: 210-213.
Yunus, R., Rasheed, H. S., Zulkifli, N. W. M., 2020. Wear and friction behavior of semi synthetic engine oil blended with palm oil/TMP ester and nano glass powder additive. Jurnal Tribologi, 26: 16-36.
Zhang, Y., Tang, H., Ji, X., Li, C., Chen, L., Zhang, D., Zhang, H., 2013. Synthesis of reduced graphene oxide/Cu nanoparticle composites and their tribological properties. RSC Advances, 3(48): 26086-26093.
Zheng, D., Wu, Y. P., Li, Z. Y., Cai, Z. B., 2017. Tribological properties of WS 2/graphene nanocomposites as lubricating oil additives. Rsc Advances, 7(23): 14060-14068.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 MAS Journal of Applied Sciences
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The journal is licensed under a 